The pendulum axles should be adjusted to the lower lid seals in the gearbox gasket set are adjusting packings 0.10 mm thick, most have too little and you will need to take additional adjustment. These loose gaskets have a thickness of 0.20 mm, Together with the 0.10 mm from the gasket can you go combine to create the right setting for you. If you swing * lift and he collapses under its own weight down slowly you have obtained proper adjustment. Start the adjustment by a large amount of gaskets to place between the bearing cover and the gearbox, and pull always 1 between off until you have the correct adjustment have been achieved. This way you pull or the seals broken you their getaway gets there but you do not always get everything loose. It is advisable to the plastic bearing rings to replace for new ones, the old bearing rings are often worn. Applicable to all aircooled Volkswagens with an oscillating * gearbox.