The cream of the crop in oil cooler area is this oil cooler which is equipped with a fan. The oil is kept neatly at temperature, so that overheating problems that can occur during traffic jams are forever gone. The fan blades are positioned at a certain angle for maximum cooling capacity with minimal noise. By changing the wiring, this air can blow or suck air, refer to the assembly instructions. In addition to this oil cooler, it is advisable to also install a thermo switch (see options) so that the fan automatically switches on and off at an oil temperature of 82 ° C. This is not necessary, you can also switch it on and off manually with an external switch (not included). The oil cooler has a dimension of 280 x 260 x 40 mm (lxwxh) and the fan is only operating at 12 Volt. mounting tip: the fan is fixed using flexible spacers, do not tighten the fan against the oil cooler, then the flexible arrangement is of no use anymore and resonances can occur. To mount the whole vibration free in the car it is advisable to mount vibration dampers between the cooler and the body (see options).